Intumescent Sealant

Click to see full view

Uses

The intumescent acrylic is used to form linear gaps seals, where gaps are present in walls and floor structures and linear joints where wall an floor construction abut
Used to form a penetration seal around metallic and electrical cables to reinstate the fire resistance performance of wall and floor construction
Intended function is to reinstate the fire resistance performance of the fire compartment

Intumescent acrylic can provide up to 240minutes fire resistance integrity depending on the application and backing material
Excellent adhesion with common building materials
Extended shelf life—24 months
Movement capability ≤7.5%
Fully paintable when dried
Cartridge and foil packs are fully recyclable
Available in white
Intumescent Acrylic has been tested to the requirements of BS EN1366-4
Provided the product is installed in accordance with the requirements of the guidance document, the fire performance characteristics of the product is guaranteed for a period of 10 years
CE Mark—2821-CPR-0182

Ensure all surfaces are clean and dry.
Linear Joint seals: Position appropriate backing material within the gap at the minimum depth to allow for the specified thickness of sealant.
Linear Joint seals: Gun the sealant into the opening ensuring the gap is fully filled and scrape away any excess material.
Penetration Seals: Tightly pack mineral wool backing material within the opening, leaving a 10mm depth to the plane of the floor or wall surface on both sides
Penetration Seals: Gun the sealant onto both exposed face of the mineral wool backing and around the services, ensuring good contact. Scrape away excess.
Penetration Seals: Tool the surface as required within 30min of application using a wet spatula. Clean tool using soap and water.